Skip to content
QNAP 4-bay

QNAP TS-464

CPU
Intel Celeron N5095
RAM
8 GB max 16 GB
Network
2 × 2.5GbE
M.2 / PCIe
2 / 1

Model TS-464-8G

Who the QNAP TS-464 is for

Four bays, one parity drive, 75% of the space to fill. (RAID still isn't a backup, mind.) The chip is an Intel Celeron N5095.

A PCIe slot leaves room for a 10GbE card if you outgrow the built-in ports. Two M.2 slots too.

Usable space with 4 matching drives

These are decimal TB, the way drive boxes count them, and Windows will show roughly 9% less. Got a mix of sizes? Put your own drives in the calculator and it'll work out the layers.

Each driveRAID 5 (1 parity)RAID 6 (2 parity)
4 TB × 412 TB ≈ 10.9 TiB8 TB ≈ 7.3 TiB
8 TB × 424 TB ≈ 21.8 TiB16 TB ≈ 14.6 TiB
12 TB × 436 TB ≈ 32.7 TiB24 TB ≈ 21.8 TiB
16 TB × 448 TB ≈ 43.7 TiB32 TB ≈ 29.1 TiB
20 TB × 460 TB ≈ 54.6 TiB40 TB ≈ 36.4 TiB
24 TB × 472 TB ≈ 65.5 TiB48 TB ≈ 43.7 TiB

Specifications

Taken from QNAP's own spec page, and "Not published" means they don't list it.

QNAP TS-464 specifications
Drive bays 4 bays source for Drive bays (qnap.com, opens in new tab)
CPU Intel Celeron N5095 source for CPU (qnap.com, opens in new tab)
CPU cores 4 cores source for CPU cores (qnap.com, opens in new tab)
CPU architecture x86-64 source for CPU architecture (qnap.com, opens in new tab)
Installed RAM 8 GB source for Installed RAM (qnap.com, opens in new tab)
Maximum RAM 16 GB source for Maximum RAM (qnap.com, opens in new tab)
ECC RAM Not published
1GbE ports 0 ports source for 1GbE ports (qnap.com, opens in new tab)
2.5GbE ports 2 ports source for 2.5GbE ports (qnap.com, opens in new tab)
10GbE ports 0 ports source for 10GbE ports (qnap.com, opens in new tab)
M.2 NVMe slots 2 slots source for M.2 NVMe slots (qnap.com, opens in new tab)
PCIe slots 1 slots source for PCIe slots (qnap.com, opens in new tab)
Warranty 3 years source for Warranty (qnap.com, opens in new tab)

Sources: qnap.com